Modules
Installed Modules
0
A voice based help system that provides DTMF commands over the air on active modules. If you do not want this broadcast to the general public, then you should disable this module.
The SiteStatus module is useful for monitoring the general status of a repeater site remotely. Through the use of Digital and Analog sensors, you can be audibly notified of events and things of interest from a maintenance perspective...
This module allows control of a cooling fan via a GPIO pin. It follows the PTT activity or comes on after a delay.
2
The EchoLink® network allows licensed Amateur Radio stations to communicate with one another over the Internet using VOIP technology. This module allows worldwide connections to be made between this and other repeaters or to individuals using EchoLink nodes.
3
The ORP Remote Relay Module is a module to add the ability to control relays by DTMF tones remotely via GPIO pins. It will support up to 8 relays and offers the ability to restrict access with a pin code.
5
The ORP Rig Control Module is a module to add the ability to control supported radios remotely by DTMF tones. This is a more advanced modules and requires the use of the HamLib Library which must also be installed. Radio support is limited in part by what HamLib supports.
6
ORP Voicemail is an adaptation of the TclVoiceMail module design specifically to run on OpenRepeater.
7
The FRN module is used to connect to Free Radio Network (FRN) servers. This service is more common in Europe. Check the legality in your country prior to use.